Call Truckstop Group on 01905 675101

Course date and venue: Call for Availability
Skill Level:
Duration: 1 day

This new course looks into the latest technologies being implemented by vehicle manufacturers for ADAS (Advanced  Driver Assist Systems) the course will give a good understanding of the way that there
systems work on the vehicle and how they will assist the driver.

These new systems will present challenges to the workshop when diagnosing and repairing them and many will also need to be calibrated when they have been removed, replaced or repaired.

This course is both theory and practical based on live vehicles using the latest Texa ADAS calibration equipment including static and dynamic calibrations, parameters, errors, and activations.


Introduction: The Evolution of Transportation ITS (Intelligent Transportation Systems) What is pushing the diffusion of ADAS technologies

• Description and Operation of ADAS Systems Lane Departure Warning System (LDWS) Traffic Sign Recognition (TSR) Adaptive Cruise Control (ACC) Adaptive Cruise Control Sub-functions Anti-collision Brake Assist System Pedestrian Detection with auto brake Adaptive High Beam Control (AHBC) BSD – Blind Spot Detection (BSD) Park Assist system Night Vision Assist Drowsiness Detection System Head UP Display (HUD)

• ADAS System Calibration

• Pre-Calibration Conditions

• Self-Diagnosis Help

• Issues related to ADAS systems: Resolution methods

• Examples of static calibration VOLKSWAGEN Group-Front Camera Calibration

• Example Of Dynamic Calibration VOLVO-Front camera calibration

• ADAS Sensors

• Ultrasound Sensor

• RADAR (Radio Detection And Ranging)

• Manual radar calibration

• Rear Radar

• Camera System

• Front Camera

• Front Stereo Camera

• Reversing Camera

• Surrounding Camera

• Wind screen Radar Module with integrated Camera (RACam)

• Data Fusion

Cancellation Policy Cancellations and Transfers All cancellations and transfer requests must be made in writing. Customer name changes can be made at any time without charge, except for the Level 3 Award in Automotive Refrigerant Handling (F-Gas) course, where there will be a £25.00 fee. Any incorrect spelling of candidates’ names, where the customer is at fault, will incur a £5.00 fee. Where a customer cancels their place on the course, or requests to transfer to an alternative course or date, the full cost of the course will be due, unless notice
specified below is given prior to course start date:

More than 4 weeks’ notice – No charge
4 weeks’ notice – 30% of the cost
2-3 weeks notice – 50% of the cost
1-2 weeks notice – 75% of the cost
less than 1 weeks notice – 100% of the cost

Refunds of monies paid will be made to customers if: 1. TEXA UK cancels the course and does not offer an alternative date. 2. There are individual exceptional circumstances where the customer cannot
attend. 3. A complaint is upheld.
Other Where the customer is to provide a venue and/or equipment, TEXA UK reserves the right to verify its suitability. TEXA UK reserves the right to provide a substitute trainer should the nominated trainer becomes unavailable. TEXA UK reserves the right to re-schedule any commercial programme where
minimum numbers of candidates are required and not achieved.

Make an enquiry

Your Name (required)
Company Name (required)
Your Email (required)
Your Phone Number (required)
Training Course (required)
Number of attendees (optional)
Your message

Can't find what you are looking for?


Over 25
years experience



Over 25
years experience